by Freespace535 » Mon Mar 21, 2011 6:43 pm
**Edit: Okay, here's what happened just now:
Old motor was in the gun. Full functionality.
Removed old motor from the gun, tested outside the gearbox. Full functionality.
Attached new motor, outside the gearbox. Full functionality.
Put new motor inside the gearbox. Nothing happens. Reverse polarity of the wiring. Nothing happens.
Put back in the old motor. Full functionality. Reverse polarity, nothing happens.
Can this be chalked up to some sort of incompatibility? The gears on the motors pinion gear look a little 'sharper' than the stock motor (the lower outside edges have a point to them, whereas my stock motor seems to be worn down or intentionally flattened.
This is my signature. Hear it roar.