What can I upgrade to increase range on a KWA G36c?

[Braddock]

FPS is good for pushing a heavier BB which will translate to more accuracy because the bb has more mass so it is less effected by wind/gravity/drag.

Fixed

[Junto]

Selling it back and getting something with a longer barrel. :P

[Minerva]

Selling it back and getting something with a longer barrel. :P

He means get a huge barrel and stuff it in there

Like this

[matteumayo]

Selling it back and getting something with a longer barrel. :P

I've heard that barrel length doesn't do much in airsoft.

You may recall that I have made a few threads about accuracy/range, and throughout it was shown that barrel length really doesn't matter that much.

An Mp5k can hit a target with the same other parts as an M16, even though it has a very short barrel.

Thanks everyone, I'll try to find out the optimal nozzle/barrel length configuration for 274mm.

Or if any of you know it already, could you post it?

-matt

[Blizzard]

Matteumayo: Why did you post the exact same thread again? Your question has already been answered: http://www.airsoftpacific.com/viewtopic ... sc&start=0

[Icepick]

Or if any of you know it already, could you post it?

Please do so, I've been wanting to know this since I showed up.

[Switchback]

Matteumayo: Why did you post the exact same thread again? Your question has already been answered: http://www.airsoftpacific.com/viewtopic ... sc&start=0

Now I could understand if this was posted by someone else, but...that is interesting. Otherwise, both good threads.

[G36 FTW]

Selling it back and getting something with a longer barrel. :P

I've heard that barrel length doesn't do much in airsoft.

You may recall that I have made a few threads about accuracy/range, and throughout it was shown that barrel length really doesn't matter that much.

An Mp5k can hit a target with the same other parts as an M16, even though it has a very short barrel.

Thanks everyone, I'll try to find out the optimal nozzle/barrel length configuration for 274mm.

Or if any of you know it already, could you post it?

-matt

Cylinder rated for 200-250mm barrel:
http://shop.ehobbyasia.com/upgrade-part ... 250mm.html

Tight bore barrel:
http://shop.ehobbyasia.com/upgrade-part ... 247mm.html

A Prometheus or Madbull hop-up bucking would serve you well:
Prometheus:
http://shop.ehobbyasia.com/upgrade-part ... -type.html
Madbull:
http://shop.ehobbyasia.com/upgrade-part ... g-red.html

[matteumayo]

Selling it back and getting something with a longer barrel. :P

I've heard that barrel length doesn't do much in airsoft.

You may recall that I have made a few threads about accuracy/range, and throughout it was shown that barrel length really doesn't matter that much.

An Mp5k can hit a target with the same other parts as an M16, even though it has a very short barrel.

Thanks everyone, I'll try to find out the optimal nozzle/barrel length configuration for 274mm.

Or if any of you know it already, could you post it?

-matt

Cylinder rated for 200-250mm barrel:
http://shop.ehobbyasia.com/upgrade-part ... 250mm.html

Tight bore barrel:
http://shop.ehobbyasia.com/upgrade-part ... 247mm.html

A Prometheus or Madbull hop-up bucking would serve you well:
Prometheus:
http://shop.ehobbyasia.com/upgrade-part ... -type.html
Madbull:
http://shop.ehobbyasia.com/upgrade-part ... g-red.html

Thank you!

[matteumayo]

Matteumayo: Why did you post the exact same thread again? Your question has already been answered: http://www.airsoftpacific.com/viewtopic ... sc&start=0

I like a second opinion.

If it's a problem I'll stop