AEG Wire set info

[Sixxgun]

looking at few wiresets on Airsoft Gi and was wondering if anyone has bought one off there? What is in "set"? I'm look for the trigger switch and any electrical for the gearbox (m4)

[Toan]

comes with everything you need to put it in the gearbox and shoot, but you might have to extend the wires if its wired to the back. this is the one i bought for a customer and all i had to do was solder about an inch or so to the back so he could connect/disconnect his lipo with ease.

http://www.airsoftgi.com/product_info.p ... ts_id=2849

[Nec]

You can buy much better wire, for a lot less if you buy off of Mcmaster-carr.

[pseudoanimosity]

If you're handy with a soldering iron, it's fairly easy to rewire your gun by yourself. (also, a quick side note: rewiring + shimming at the same time yields HUGE performance increases) I just went to the local hobby shop (Tammie's Hobbies) and bought 3 feet of 16 gauge wire for about 8$, then did it myself. It only takes about 40 minutes in and out if you're good with gearboxes.

But, if you want to get a wire set and save yourself the trouble, the full "set" has everything you need.

[Sixxgun]

i'm needing trigger switch ( think that's what its called) but yeah if I just had that part I would wire it myself. Basically building gun from ground up.