Lipo

[phantom -VSR-]

How come this is so cheap? http://www.airsoftpost.com/product_info ... s_id=34491

Also, can I use the same charger that came with my socom gear 11.1v 1500mah 15c lipo?

And will it fit into this... http://www.airsoftpost.com/product_info ... s_id=33445

Thanks guys!

[Toonvater]

would you rather pay 30 bucks on a 11.1 1300 or 10 bucks. if you can sauter or know some one who does then get your batteries from here http://www.hobbypartz.com/skylipo3s20c.html
and out the connections on it.
i dont know about you but i like to save money and not pay for shipping. airsoft lipo's are a waste of money so get this.

[phantom -VSR-]

Will that fit into the buffer tube?

[Toonvater]

not really but get a small enough one and it fits perfectly in my crane stock, but you have to wedge it in. or get a full stock, i do that.

[phantom -VSR-]

I think I'll just stick with the Matrix, can I use the charger that came with my socom gear lipo on it?

[Patrick750]

I have a lipo like that. The main reason it fits so well into MY buffer tube is because i soder'd Deans onto it.

[phantom -VSR-]

So it will fit?

[Riddick]

Yes

You have more than enough room to fit width and depth from the picture below and the measurement of the battery.

Lipo Dimensions: 125 x 21 x 19mm

[phantom -VSR-]

Thanks. And can I use that charger?

[Riddick]

Yes it will work with the same charger. I don't know if that charger is a "smart" charger where it shuts off automatically when battery is full charged. If so, your fine, if not, then you need to adjust your charge times since the pack has a slightly less mah capacity.

[phantom -VSR-]

It has lights that tell you when it's done.

[Riddick]

It has lights that tell you when it's done.

then you are good to go

[phantom -VSR-]

Thanks guys!