jg bar 10, bolt problems

[snipersammy51]

the problem is that when i pul the bolt back if feels fine, but when i push it back in it is like i am pushing it forward with more force than pulling it out. if you know anything to help me it would be greatly appriciated.

[KA-BAR]

simple answer is to lube the cylinder.

is your spring upgrade/guide rod installed backwards?

did you force the cylinder locking pin and possibly break it?

those are a few things i can think of that would cause these issues.

[snipersammy51]

i have lubed the bolt with silicone and it works, and i have not installed a higher fps spring but i do have the upgraded piston and spring guide off airsoft gi
piston
http://www.airsoftgi.com/product_info.p ... ts_id=5709
and
spring guide
http://www.airsoftgi.com/product_info.p ... ts_id=5712

[KA-BAR]

it is possible that when you are arming the bolt that the O-ring is coming unseated.

also showing me pics of the parts you have does jack squat for me in diagnosing your issue.

pics of your actual cylinder would help far better.

its not a parts issue, it is how you installed them most likely.

[snipersammy51]

hey thanks man that was the problem, the o ring was getting caught so i replaced it and it works better. i have never had a sniper that has done that so thany you for the help

[k3gn3123512]

hey thanks man that was the problem, the o ring was getting caught so i replaced it and it works better. i have never had a sniper that has done that so thany you for the help

I am pretty sure that mutilating a human and installing an O-Ring inside him is illegal. The gun you have is a sniper rifle. The person that operates the sniper rifle is a sniper.

[KA-BAR]

^ignore the above poster.

i am glad i was able to hlep you solve your issue. feel free to PM me any questions, and i hope to see you at ghillieman 2010.

[Blais21]

hey thanks man that was the problem, the o ring was getting caught so i replaced it and it works better. i have never had a sniper that has done that so thany you for the help

I am pretty sure that mutilating a human and installing an O-Ring inside him is illegal. The gun you have is a sniper rifle. The person that operates the sniper rifle is a sniper.

Do you have a life or do you just live to pick out every issue with posts on AP?

[Blais21]

Sorry for taking your thread sniper sammy. Did you get your problem fixed? Because I have been having the same problem with mine.

[Cap n pickles]

Sorry for taking your thread sniper sammy. Did you get your problem fixed? Because I have been having the same problem with mine.

hey thanks man that was the problem, the o ring was getting caught so i replaced it and it works better. i have never had a sniper that has done that so thany you for the help

Did you read the thread Blais?

[Blais21]

Yeah I did but I think I was focused on what KingNikan said, so I didn't realize that the problem did get solved. Sorry. Time to go fix my bar 10 once in for all.

[k3gn3123512]

Just trying to teach him the proper term.
So there would be no chance of him saying that he will insert his clip into the sniper.

[snipersammy51]

seriously i already know this i am not some sort of noob like you think kingnikan

[snipersammy51]

also for blais21 i wiped down everything inside the and sprayed a bit of silicone into it so i hope you fix yours.

[Blais21]

yep lol. Just got it fixed yesterday. Thanks KA-BAR, and sammy.