well mb06 bolt problem

[ghillieghost100]

Hey,

I've just bought a Well mb06.
I think it's a great gun litle short but shoots nice!
I've only got one problem and it's hard to explain so I'll do my best:
So after shooting some bb's the bolt refuses to lock the fire meganisme so it just goes back with the bolt and that makes it unable to shoot. the trigger just goes easyly back instead of (when it can fire) hard. it's very anoying and it goes sometimes on for 5 times pulling the bolt back.
could somebody please help me on how to fix this?

[Shadowsta13]

Assuming that you bought it from a store and have a warranty, I would just try to send it back to try to get a new one.

[pathfinder]

one of two things is happening here.

the lip on your stock plastic piston is worn and will not catch the sear.

or

you have broken the sear mech.


get a aluminum piston with a 90 degree angle on the piston lip. your problems will be solved.

[Heretic]

I see your problem.

You bought a Well.

[ghillieghost100]

one of two things is happening here.

the lip on your stock plastic piston is worn and will not catch the sear.

or

you have broken the sear mech.


get a aluminum piston with a 90 degree angle on the piston lip. your problems will be solved.

I think that's the problem yeah and do you know how to change it??

[pathfinder]

I see your problem.

You bought a Well.

my scout rifle was a stock well....shot strait as a laser under 400 FPS.

there is a thread still up on it.
viewtopic.php?f=14&t=32664

that rifle will cut your name in two.


to the OP: yes i do know how to fix such a issue. i am a student of the school of kick a$$, taught by bill youngblood. i can crack a cylinder just as good as any. and some of my builds are just as legendary as the deathstar.