G&G FNC

[CommieHunter]

Airsoft Outlet can order the top rail for those for you.

[Skunk Ape]

Airsoft Outlet can order the top rail for those for you.

thx. commie

[Deep6]

As for the whole "be a man" thing, we'll see how manly you feel when you're on your 5th run to respawn because you cannot move your body while holding the rifle to bear. But who am I to throw stones...I am 6'1" and 190lbs and wield an M249 and would know a little about front heavy rifles.

This little lady disagrees with you


I love it when a rifle's balance is nicly centered about the grip, but sometimes a rifle's iconic sexiness is more important. At least for skunkAPE, who I met on Friday, I don't think rifle weight is a concern.

[Skunk Ape]

no sir , you are right weight not a huge concern i am 6'5" 260 but i will still rock a sling for when not in firing position, it will still get heavy. but the pure hawtness of it is enough for me.

[Jewish Ninja]

FWIW, that's not an FNC

[Deep6]

Oops, you're right. It's still sexy... and front heavy. I mean the gun, of course.

[madmax]

I'm 5' 11" and 145lbs, i'm planing on lugging the beast around (the one scared has is mine ). Don't think it'll be much of a problem. I'm used to an m700 with a scope and that thing is long and fairly heavy. never used a bipod or a sling. Had a macky on my back as well (not that it's very heavy...). I'm sure i'll be just fine with this thing.

[Skunk Ape]

couple questions id like responses on about this replica. 1.) what people think about going 11.1v batteries to make up for the semi-slower rof? bad on internals? heard if trigger happy may burn out? 2.) i really like fore grips, a.) can a ris be attached for one? b.) would that just look retarded? c.) is there a better alternative for a for grip than adding a ris? such as a direct connect version? d.) what people think about putting maybe a 4x acog on to make it a some-what long range dmr type? these may be dumb ?'s but i do not know the answers and DO NOT want dumb answers only friendly advice. thx.

[Russkie]

couple questions id like responses on about this replica. 1.) what people think about going 11.1v batteries to make up for the semi-slower rof? bad on internals? heard if trigger happy may burn out?

Yes you can burn out your contacts if you use an 11.1v LiPo, but if you get a proper Mosfet installed then your contacts will be fine. You also want to double check the reinforcement of the piston, gears, and gearbox shell. If the reinforcement is meh then I replace it or else one of the components in the gearbox will go kaput. This is especially for V2 gearboxes. V3, V6, V7 you can get away with a bit of abuse. I forget which one the FNC has.

Honestly though just get a speed motor. It will give you 11.1v speed with the standard torque motor, but on a 7.4v. If that's not enough (it's usually around 1200 RPM with a speed motor which I find this to be the ideal outdoor ROF) then you can throw in the 11.1v and get probably 1800 RPM (I'm not sure as I have not chronoed with an 11.1v on a speed motor yet).

[ScaredShooter]

I'm 5' 11" and 145lbs, i'm planing on lugging the beast around (the one scared has is mine ). Don't think it'll be much of a problem...

^I don't know who this guy is.

Just kidding.

Yeah good gun. Sexy factor is nice.