Users of VSR10 gas bolt

Discussion about sniper rifles or bolt-action.
Post a reply

Users of VSR10 gas bolt

Postby quigly » Sat Nov 27, 2010 6:32 pm

I got a gas bolt conversion today, and need some info on it. I was aware before i got it that it leaked and the o-rings needed to be soaked. Didn't seem like top big of a deal. So after heavily soaking the rings, it still leaked out the injection valve. I noticed that is was actually coming out the small hose like piece in the center of the valve. So I am stumped at this point. Is there another ring inside of there, or is a more serious problem. And I have googled it and searched and found nothing.
My father once told me, "Some times all you have is a bullet and a prayer, don't miss."
User avatar
quigly
Specops
Specops
 
Team: N/A
Posts: 1230
Age: 31
Joined: Sat May 23, 2009 7:35 pm
Location: Lacey, wa
Top

Postby Jester316 » Sat Nov 27, 2010 8:20 pm

Fill valves have O-rings in them. Unscrew it and either replace, soak, teflon tape, or some combination of those. If that doesn't work, try replacing it (the whole fill valve) with one from a GBB.
Image

FIRE CLEANSES ALL!
User avatar
Jester316
1337
1337
 
Team: SpecDet1
Posts: 5858
Age: 36
Images: 7
Joined: Tue Oct 16, 2007 10:26 am
Location: Beaverton
Top

Postby Jester316 » Sat Nov 27, 2010 8:21 pm

Shot both barrels.....
Image

FIRE CLEANSES ALL!
User avatar
Jester316
1337
1337
 
Team: SpecDet1
Posts: 5858
Age: 36
Images: 7
Joined: Tue Oct 16, 2007 10:26 am
Location: Beaverton
Top

Postby quigly » Sat Nov 27, 2010 8:25 pm

How do I unscrew it? I am new to the world of valves and don't want to screw it up.
My father once told me, "Some times all you have is a bullet and a prayer, don't miss."
User avatar
quigly
Specops
Specops
 
Team: N/A
Posts: 1230
Age: 31
Joined: Sat May 23, 2009 7:35 pm
Location: Lacey, wa
Top

Postby Jester316 » Sat Nov 27, 2010 8:29 pm

Do they have a notch cut in it? Like so:
Image

Insert screw driver, and unscrew them...
Image

FIRE CLEANSES ALL!
User avatar
Jester316
1337
1337
 
Team: SpecDet1
Posts: 5858
Age: 36
Images: 7
Joined: Tue Oct 16, 2007 10:26 am
Location: Beaverton
Top

Postby quigly » Sat Nov 27, 2010 8:46 pm

No, it's not one of those valves. Here is a pic.


Image
My father once told me, "Some times all you have is a bullet and a prayer, don't miss."
User avatar
quigly
Specops
Specops
 
Team: N/A
Posts: 1230
Age: 31
Joined: Sat May 23, 2009 7:35 pm
Location: Lacey, wa
Top

Postby Jester316 » Sat Nov 27, 2010 9:40 pm

Well, than I have no idea. I would be shocked if that valve was molded into the bolt...
Image

FIRE CLEANSES ALL!
User avatar
Jester316
1337
1337
 
Team: SpecDet1
Posts: 5858
Age: 36
Images: 7
Joined: Tue Oct 16, 2007 10:26 am
Location: Beaverton
Top

Postby quigly » Fri Dec 03, 2010 7:43 pm

Can anyone tell me what kind of valve that is, how I can take it out, and where I can find one?
My father once told me, "Some times all you have is a bullet and a prayer, don't miss."
User avatar
quigly
Specops
Specops
 
Team: N/A
Posts: 1230
Age: 31
Joined: Sat May 23, 2009 7:35 pm
Location: Lacey, wa
Top

Postby Osprey » Sat Jan 22, 2011 6:19 pm

I have VSR 10 to, And I have never seen this set up ether.
A man can be destroyed but not defeated.
- Ernest Hemingway
User avatar
Osprey
Ranger
Ranger
 
Team: N/A
Posts: 669
Age: 32
Joined: Sun Jan 16, 2011 2:25 pm
Location: Molalla, Oregon
Top

Postby quigly » Sat Jan 22, 2011 8:34 pm

I got that valve out. It appears to be a normal valve just with out the notch for a screw driver. I replaced it with a normal valve, but it is still leaking around the valve. I'm going to try to put some teflon tape around it to see if that helps.
My father once told me, "Some times all you have is a bullet and a prayer, don't miss."
User avatar
quigly
Specops
Specops
 
Team: N/A
Posts: 1230
Age: 31
Joined: Sat May 23, 2009 7:35 pm
Location: Lacey, wa
Top

Postby Osprey » Mon Jan 31, 2011 7:43 pm

quigly wrote:I got that valve out. It appears to be a normal valve just with out the notch for a screw driver. I replaced it with a normal valve, but it is still leaking around the valve. I'm going to try to put some teflon tape around it to see if that helps.
Tell me how is turns out, and by the way can you give me the website you bought that conversion kit from.
A man can be destroyed but not defeated.
- Ernest Hemingway
User avatar
Osprey
Ranger
Ranger
 
Team: N/A
Posts: 669
Age: 32
Joined: Sun Jan 16, 2011 2:25 pm
Location: Molalla, Oregon
Top

Postby quigly » Wed Feb 02, 2011 7:56 pm

I bought it second hand.
My father once told me, "Some times all you have is a bullet and a prayer, don't miss."
User avatar
quigly
Specops
Specops
 
Team: N/A
Posts: 1230
Age: 31
Joined: Sat May 23, 2009 7:35 pm
Location: Lacey, wa
Top

Postby Osprey » Sat Feb 12, 2011 12:07 pm

quigly wrote:I bought it second hand.
Dang it! Thanks any way
A man can be destroyed but not defeated.
- Ernest Hemingway
User avatar
Osprey
Ranger
Ranger
 
Team: N/A
Posts: 669
Age: 32
Joined: Sun Jan 16, 2011 2:25 pm
Location: Molalla, Oregon
Top
Post a reply

Return to Bolt-Action & Snipers

Who is online

Users browsing this forum: No registered users and 2 guests