The gun externally is all in great shape, however the internals not so much. Here is the quote from the ad.
This gun is great. With a .40g bb and 300 fps, it gets up to around 170ft of range. I have put over $655 into the gun, It has 2 40 round magazines, KM 6.03 inner barrel, Laylax L96 AWS high pressure piston, Laylax L96 AWS spring guide, and an NC Star 3-9x40 scope. The only thing wrong with the gun, is 3 screws on the feeding system that are messed up. 1 screw, on the top, is bored out. The other 2 screws that are holding it in place are bent slightly to were they wont go in all the way. Thats an easy fix, just go to your local hardware store and they will match the screws up and boom, good as new.
Here he is talking about the problems that are occurring with the gun:
It will feed one bb, maybe two, and then since the feeding system is not held down all the way it jams. Then you will have to take the mag out, pull the bolt back again and close it. Then fire the bb. All you would need to replace is 3 screws that hold down the feeding system.
And...here are the pictures he sent me over the email of the screws he is talking about:
Now my questions for all of you, since you probably have more experience with this kind of stuff. Would this be considered a good buy and should I take the plunge in trusting that it is only the 3 screws that can be replaced with supposedly "ease".
I'm not changing my mind on the type of bolt action platform to use, I have decided on the Tokyo Marui L96, so please don't convince me otherwise. I have the money to buy it from the guy but just am skeptical on getting it in working order.
Thanks alot guys and gals!
