UNIFORM CONVERSIONS, REPAIRS & UPGRADES

[Unconventional]

Thanks for the review, Jose...much appreciated.
I like reviews, people...don't hesitate to send them my way so I can post them to my blog. PM them or I can give you my e-mail addy.

And thanks "Kilo" for the kind words...

Cheers!

[Unconventional]

DRL (Device Retention Lanyards)

..see pricing in the ads section under UNIFORM MODIFICATIONS.

[Unconventional]

UPDATED 01/04/12

For Barrett "Jewish Ninja"


Custom rear bellowed pocket additions over the standard existing slit pockets and standard FCHP conversion with Mil-Spec OD velcro and improved side adjustment straps (when using OPS brand combat knee pads, dual side adjustable leg straps are not necessary...only single outer straps are needed. The OPS brand pads tend to stay centered quite well and stay in place due to their large size and weight).

UPDATED REAR BELLOW POCKETS...POCKETS ARE NOW BELLOWED ONLY AT THE BACK INNER SIDE PER RAID TYPE POCKETS AND THE OUTER SIDES OF THE POCKETS ARE NOW STITCHED DOWN AND FLATTENED PER RAID DESIGN













Below photos show rear pocket features before they were stitched down on the outer sides to make them smaller and more streamlined, per RAID design







FCHP conversion for woodland BDU pants with OPS brand combat knee pads

[Jester316]

Those pants make me want to sing a song about big butts...


And I cannot lie...

[Unconventional]

EDITED MY ABOVE POST

They were a little big because I forgot to sew down the outer sides of the bellow pockets to streamline them like RAID pockets. Just got done with them again.

The post will be edited soon to reflect the changes to the pockets.

[Unconventional]

This was a recent order request from a local PD SWAT unit out of Arkansas. I was pleased to take on a LE order for a change of pace...

The request was a retro-fitting of Crye combat elbow pads to their 5.11 Rapid Assault Shirts. The shirts were modified to allow the Crye elbow pads to be utilized along with the integrated velcro stretch adjustment straps that are on the pads.

These shirts are very comfortable and 5.11 did a great job with the design as they already have an elbow pad shaped pattern of material over the elbows. However there are no actual elbow pad pockets on the shirts so the double layer of material had to be modified to allow them to take hard-cap elbow pads.

The SWAT team leader wants 6 shirts done...here's the 2cnd one that I've done already. They will be sending 6 pairs of pants in the next month or so for my enhanced FCHP conversions (EFCHP)...which I will be offering at an additional cost. Pricing hasn't been set yet..I'm working on it.

Dark blue 5.11 Rapid Assault Shirt with addition of Crye elbow pads installed










*

Shirt is inside-out showing reinforced slit holes made to allow Crye velcro stretch straps to pass through sleeve of shirt to go to elbow pads

[Darius137]

Can't go wrong with Fancy Blue.

[Unconventional]

For a PMC customer...

Paraclete SOF ACU uniform converted to take Crye combat elbow pads and AirFlex pads. Other things were done to it per my recommendation to the customer... secret squirrel stuff to help him stay alive per E&E.

* customer is using tan pads...black Crye pads in photos are for display purposes only

[Unconventional]

Replica AOR1 pants stretch fabric change-out for a local customer...

A photo showing the non-issue "mocha" brown stretch fabric on one knee and the correct stretch fabric on the other...before finishing the rest of the change-over


After the change-over




*

[Unconventional]

Currently working on "Androids" order, "Ash's" order and a local customer order.
Some materials that I had to order for the projects came in late..etc.
Hold tight...it will get done.

[Switch]

I have a pair of TRU-SPEC woodland pants coming in, that I would like to get modded by you. I will be in touch soon, I just thought I would give you a heads up now

[Unconventional]

Copy that...thanks "Switch" for your interest in my services.

[Ash]

Can't wait to see my order! Unconventional your conversions are awesome!

[Switch]

Hey, will you be able to modded A-TAC FG Pants once they come out?

[Mtgriz]

This is a picture taken from another forum of some work done in Virginia Beach. Would you be able to copy this with a supplied BDU top and Under Armor shirt? I'm mostly interested in the collar and Raid mod.

Big fan of your stuff, thanks for the consideration.