SMOKING HOLE RaceGun, KelTec PMR30, Hades Arrow Mortar Rocke

[ehobbyasia.com]

SAPH Custom Race Gun - SMOKING HOLE (Standard)
Tokyo Marui Hi-Capa 5.1 Based
Superior performance with HFC 134a Gas and Crispy Blow Back with HFC 22 Gas
Gas Blow back Cycling is ultra smooth
Aluminum SMOKING HOLE Slide Kit
SAPH Stainless Steel SV Logo CNC Hammer Set
SA Custom Reinforced Polymer Grip (Red, Black & Gold Color Splashing Grip )
Black Color Trigger
Glow Front & Adjustable Rear Sight - Ambient Light collecting acrylic rods, 1x Red (Front)
31 + 1 Rounds Full Metal Tokyo Marui Gas Magazine
Full Metal AIP Magwell (Black)
Ready for Top Gas, achieving 310 FPS of muzzle velocity (Power)
As always, Adjustable HOP UP system is equipped

Excellent Collection Piece to all Airsoft Fans

Come With Pistol Case (275mm x 225mm x 75mm)





Socom Gear KelTec PMR30 (CO2 Blow Back Version)
1:1 Ratio realistic gas blow back airsoft pistol
Fully Licensed by Kel Tec

Solid Metal / Polymer Slide, Polymer Frame and Outer Barrel
Gas Blow Back Pistol with Semi-Automatic - Light weight matte black polymer with Double-Action Trigger
Two color fiber optic front and rear sights - 1x Green (Front) / 2x Orange (Rear)
Ambidextrous safety switch
Integrated Picatinny rail for attaching laser / flashlight

Powerful CO2 offer 450 FPS out from the box (fits on 12g CO2 cartridge)
The CO2 is loaded into the pistol grip
Metal Constructed Magazine accommodate 15 Round 6mm airsoft plastic pellets





Hakkotsu 70mm Hades Arrow Mortar Rocket

Fill the rocket compartment with water and then charge it with the supplied CO2 gas charger to pressurise the system. The rocket has folding 'flip-out' fins to help it fly straight, so you fold these in and drop it down the tube. Once it hits the firing pin inside the base of the launch-tube, it instantly shoots out with an awesome whooshing sound the fins pop back out to stabilise it and it blasts on for around 80Metres

Include:
1x Mortar launching tube 710mm x 115mm x 100mm, 2x Mortar Rockets 535mm x 70mm (Diameter), 1x CO2 Gas Charger, 5x Spare rear cover nozzle seals

Take it to your next MilSim game, shock your teammates like the first time you opened this package





www.eHobbyAsia.com
On Youtube.
On FaceBook

[Russkie]

Surprising that some one made a PMR-30. That's pretty cool!

[Jewish Ninja]

Surprising that some one made a PMR-30. That's pretty cool!

Especially since they are still working out the bugs of the real one.

Super lawls at the "Smoking Hole" race gun. Both the name and the design.

[Shiloh]

So what happens when one of the stabilizing fins on that mortar catches you in the neck on the way down? Try calling your hit with your spine lopped in half.

[wikingwarrior]

I seriously doubt it's that sharp but it does look like it has the potential to cause serious injury, why not make it out of plastic?

[ehobbyasia.com]

the fins are plastic.. and the yellow tip is rubber.
but that said... worse case it could be fatal... or at the least bust a eyeball open.
just taping the rubber tip on my head is painful.
Although so will most airsoft guns.
So its just and matter of following correct safety procedures.

[Riddick]

the fins are plastic.. and the yellow tip is rubber.
but that said... worse case it could be fatal... or at the least bust a eyeball open.
just taping the rubber tip on my head is painful.
Although so will most airsoft guns.
So its just and matter of following correct safety procedures.

wouldn't bust a eye ball open if you are wearing propper safety goggles now would it

The Mortar is very light. Like maybe a 1lb. BTW I don't think it can be called a mortar and a rocket

[wikingwarrior]

the fins are plastic.. and the yellow tip is rubber.
but that said... worse case it could be fatal... or at the least bust a eyeball open.
just taping the rubber tip on my head is painful.
Although so will most airsoft guns.
So its just and matter of following correct safety procedures.

ah my mistake, it looked like it was metal, but still that doesn't seem like something I'd like to play against.