Mods for M4

[Jester316]

Jester, that was very well done! I am convinced! I will be buying a 6.01 tight bore barrel.

Remember to use quality ammo and clean it often. Tighter tolerance also means that any sort of dirt and grime in it will adversely affect the barrel.

[Lushes]

Jester, that was very well done! I am convinced! I will be buying a 6.01 tight bore barrel.

Remember to use quality ammo and clean it often. Tighter tolerance also means that any sort of dirt and grime in it will adversely affect the barrel.

Ok, I only use airsplat's High grade precision bb's. And I usually clean my barrel before I use it.

[Riddick]

I had a 6.01 in my AEG, it didn't work well at all. Also, Derrik, who owns Rouge Military and is a fantastic tech, shares the same opinion. Honestly, .02mm probably isn't going to do much for your accuracy. You sound like my history teacher. *shivers*

not all barrels made are made with good precision. What brand?

the scores of 6.01mm converts cannot be wrong about the awesome powers of a 6.01mm barrel

[Jewish Ninja]

I had a 6.01 in my AEG, it didn't work well at all. Also, Derrik, who owns Rouge Military and is a fantastic tech, shares the same opinion. Honestly, .02mm probably isn't going to do much for your accuracy. You sound like my history teacher. *shivers*

How well a barrel will work for you also depends on what HOU, bucking, and nub its pared with. You could have a stock barrel with an amazing bucking and nub and have it perform better than a 6.01 with a shitty bucking and nub. The quality of ammo and the condition of the barrel can affect the results as well.

I say give 6.01 barrels a try if your willing to invest the time and money into making them awesome.

[Jester316]

I had a 6.01 in my AEG, it didn't work well at all. Also, Derrik, who owns Rouge Military and is a fantastic tech, shares the same opinion. Honestly, .02mm probably isn't going to do much for your accuracy. You sound like my history teacher. *shivers*

... You could have a stock barrel with an amazing bucking and nub and have it perform better than a 6.01 with a shitty bucking and nub. ...

Like my 275fps SCAR that could range as far as a 400fps AEG, and had groupings of a DMR. Although that was stock hop up unit and bucking, stock barrel, but with enough internal tweaking to get perfect compression... Damn I miss that gun sometimes...

[Strikerz]

Now i feel like were getting somewhere. Ill probably go with the 6.01 tight bore, what hop up should it get that would go along with the barrel?

[Strikerz]

Ok the time has come, what is my base gun going to be, i recently learned that the STAG-15 is not full metal, and i am not willing to pay more than 90 dollars for a metal body and hop up, so full metal suggestions please! I am buying tomorrow so ASAP please.

[league 4]

G&P.

[Limpy]

G&P.

[Jewish Ninja]

http://shop.ehobbyasia.com/ea-x-magpul- ... black.html

Whats wrong with that one?

As for the hop-up, stock G&P units are fine, same with the buckings.

[SlasheI2]

I would browse for a Chinese clone UBR stock, my friend has one and it is pretty nice- albeit it doesn't say Magpul anywhere...

So he should ignore you?[/quote]

Well actually, it says magpul on it, although they're fake trades, they look real.





For $45 for a rock solid stock that looks smexy, I'd say it was a good deal.

[Cjackfolife]

I would browse for a Chinese clone UBR stock, my friend has one and it is pretty nice- albeit it doesn't say Magpul anywhere...

So he should ignore you?

Well actually, it says magpul on it, although they're fake trades, they look real.



For $45 for a rock solid stock that looks smexy, I'd say it was a good deal.[/quote]


Where'd you get it?

[Prophet]

Heh... industries corporation.

[SlasheI2]

I got it from T-tiger or something; it's a Hong Kong based site.

It isn't for sale there anymore unfortunately, I was able to get the last one before magpul got them to removed it. They might actually have a secret catalog so you can try to email them a special order for it. I have seen several other chinese sites with element magpul parts which were all removed, try ordering from there as well.

Try checking out airsoft-club.com
www.pro--t.com
acmgear.com
and other chinese sites, just email them to see if they have them, though the price would probably be higher.

[Strikerz]

I got it from T-tiger or something; it's a Hong Kong based site.

It isn't for sale there anymore unfortunately, I was able to get the last one before magpul got them to removed it. They might actually have a secret catalog so you can try to email them a special order for it. I have seen several other chinese sites with element magpul parts which were all removed, try ordering from there as well.

Try checking out airsoft-club.com
www.pro--t.com
acmgear.com
and other chinese sites, just email them to see if they have them, though the price would probably be higher.

Thanks, really didnt want to buy it for 90 bucks