G&G CM16 uprgades

by **Switchback** » Wed Oct 12, 2011 8:18 pm

Minerva wrote:SHS high torque motor. Absolute best motor on the market next to the Lonex ones.

Always had much love for SHS. +1 on the deans... I love mine.

by **SilentSniperNBK** » Thu Oct 13, 2011 10:39 am

The SHS motors sound nice think i might try and get one of those

by **Nec** » Thu Oct 13, 2011 3:29 pm

What exactly do you want out of your gun?

by **Hitokiri1597** » Thu Oct 13, 2011 4:50 pm

SilentSniperNBK wrote:The SHS motors sound nice think i might try and get one of those

Motor replacement is definitely a good idea, mine just went out last week and I'm under 3k rounds through my G&G.

by **SilentSniperNBK** » Thu Oct 13, 2011 5:14 pm

what i am looking for in my gun is to make it shoot faster and people have been telling me to change the motor and thats what i was thinking but now i need which is the best on the market

by **Nec** » Thu Oct 13, 2011 6:15 pm

SilentSniperNBK wrote:what i am looking for in my gun is to make it shoot faster and people have been telling me to change the motor and thats what i was thinking but now i need which is the best on the market

Faster as in...? ROF (Rounds per second) or FPS (Feet per second)?
If your looking for FPS, you shouldn't be replacing the motor.

by **Minerva** » Thu Oct 13, 2011 8:43 pm

Nec wrote:
SilentSniperNBK wrote:what i am looking for in my gun is to make it shoot faster and people have been telling me to change the motor and thats what i was thinking but now i need which is the best on the market
Faster as in...? ROF (Rounds per second) or FPS (Feet per second)?
If your looking for FPS, you shouldn't be replacing the motor.

I think the OP mentioned earlier he wanted more ROF, but I honestly think the SHS HS would be too much for the G&G to handle..

by **SilentSniperNBK** » Thu Oct 13, 2011 8:47 pm

I am looking for more rounds per minutes

by **Payback** » Thu Oct 13, 2011 8:54 pm

I personally feel a high rate of fire is over rated, just a waste of bb's. I would suggest getting a 9.6v battery first and see if that satisfies you. Then do the bucking/barrel upgrade and a spring. If after that you feel you still have a need for speed, do the motor and lipo.but for your gun, I would keep it simple at first.

by **Switchback** » Thu Oct 13, 2011 8:54 pm

SilentSniperNBK wrote:The SHS motors sound nice think i might try and get one of those

If you go for motor/higher ROF, don't just get an SHS motor. Go the whole nine yards and get the piston, gears, etc.

by **Minerva** » Thu Oct 13, 2011 9:24 pm

I'm pretty sure an SHS HS motor alone with a 9.6v will yield close to 25 rps.. Way too much for a that gearbox imo..

by **Nec** » Fri Oct 14, 2011 4:21 am

If you are looking for high ROF the SHS, Dream Army (KHmountain) and X High Tech (EBairsoft) will not let you down. I have had both the high speed and high torque versions and they both proform equally. These motors are giving me around 31 RPS with a 15c 1600mAh 11.1v Hot Power stick lipo and even higher (35+) with my Flightmax 2200mAh 3S1P 25C lipos and easily pulling an m120 spring. Jawz of 1st-sword can atest to this too.

http://1st-sword.com/forum/viewtopic.php?f=23&t=3172
(Bottom of the page)

by **SilentSniperNBK** » Fri Oct 14, 2011 11:32 am

rbm33 wrote:I personally feel a high rate of fire is over rated, just a waste of bb's. I would suggest getting a 9.6v battery first and see if that satisfies you. Then do the bucking/barrel upgrade and a spring. If after that you feel you still have a need for speed, do the motor and lipo.but for your gun, I would keep it simple at first.

Thats what i think ill do. start it out simple and get the upgrades a little bit later.

G&G CM16 uprgades

Who is online

Links to Stuff

Manage My Stuff

Follow AP