Rating and Comment on Airsoft All China Made

[Catch22]

Don't make me lock this. At least speak engrish.

[Minerva]

Catch I think he is using a translator..

Here is the kind of low amperage microswitch, but it MUST be used with a MOSFET or it will fry it!

http://www.mouser.com/ProductDetail/Hon ... hrSw%3d%3d

[airsoft_hk]

不，我是一個美國人，但我一直想嘗試谷歌翻譯，看它是否實際工作。我希望我能像你可以為你的書面英語的偉大知識字符的信貸。再次感謝！

*笑*你真的愚弄我。如果我们不断用中国字，也许PACIFICCHAT拳打脚踢，并要求我们回中国去。主持人不能跟踪我们正在谈论什么。我们认为是恐怖分子或叛乱。上帝保佑我们！！

[Pacman]

OK, I promise no more traditional Chinese Catch. He also gets the drift

[airsoft_hk]

Don't make me lock this. At least speak engrish.

Bro. Sorry about the previous Chinese word. In fact, we are using a website translator to tried Eng-Chinese. Hope you don;t mind. We are back to CNN channel now

[airsoft_hk]

Catch I think he is using a translator..

Here is the kind of low amperage microswitch, but it MUST be used with a MOSFET or it will fry it!

http://www.mouser.com/ProductDetail/Hon ... hrSw%3d%3d

Thanks for your information. But, What brand of MOSFET you had used and reliability is good and stable? Please acknowledge about the website.

Thank you so much, I really appreciate it...

[airsoft_hk]

OK, I promise no more traditional Chinese Catch. He also gets the drift

Haa.. See, bro. I already told you, before moderator fire us... Already got someone behind and nearly chased us out..

[Catch22]

Catch I think he is using a translator..

Here is the kind of low amperage microswitch, but it MUST be used with a MOSFET or it will fry it!

http://www.mouser.com/ProductDetail/Hon ... hrSw%3d%3d

I know exactly what the shazaam they are doing, and it's a no-go on these forums

[Pacman]

Woot, my fault

[Minerva]

Catch I think he is using a translator..

Here is the kind of low amperage microswitch, but it MUST be used with a MOSFET or it will fry it!

http://www.mouser.com/ProductDetail/Hon ... hrSw%3d%3d

Thanks for your information. But, What brand of MOSFET you had used and reliability is good and stable? Please acknowledge about the website.

Thank you so much, I really appreciate it...

The most stable mosfet design right now is the 3034. Very powerful and efficient!



This is the design JG uses and would work VERY well if that 1404 unit was replaced with a 3034!

I get the MOSFET from here: http://search.digikey.com/scripts/DkSea ... 3034-7ppbf

[airsoft_hk]

Catch I think he is using a translator..

Here is the kind of low amperage microswitch, but it MUST be used with a MOSFET or it will fry it!

http://www.mouser.com/ProductDetail/Hon ... hrSw%3d%3d

Thanks for your information. But, What brand of MOSFET you had used and reliability is good and stable? Please acknowledge about the website.

Thank you so much, I really appreciate it...

The most stable mosfet design right now is the 3034. Very powerful and efficient!



This is the design JG uses and would work VERY well if that 1404 unit was replaced with a 3034!

I get the MOSFET from here: http://search.digikey.com/scripts/DkSea ... 3034-7ppbf

Ok. Bro. I tried to change by using 2 items added in and see how. Then, battery change would get a better improvement? What the max voltage or MaH you ever tried before?

[airsoft_hk]

Woot, my fault

Not your fault, bro. Since apologized, hope other brothers accepted. As long we back on track and no breaking the rules again. In fact, I am not sure whether can used other languages to post the thread within the forum or not. Just to be fair for all, at least we use CNN or BBC language is acceptable.. Sorry all to brothers!!!!

[Minerva]

The max voltage I have tried is an 11.1v on that. Anything higher and you'd need to do some things with the fuses

[airsoft_hk]

All of them are GREAT. Great base guns. All decent quality, sometimes bad QC but that's to be expected. Only thing is I wish more of them came with Neo motors stock and listened to their consumer base for advice more..

One can dream

Actually, I think A&K, Cyma, JG, D-Boy, Galaxy and Double Eagle amongst more stable manufacturers. Seems their products really upgraded and quality improved than before. One major problem is the about their shipment not constantly due to Chinese legislation there.

Move to Hong Kong

Well, JG did this way.. seem works but still got some minor problems amongst them..

[airsoft_hk]

The max voltage I have tried is an 11.1v on that. Anything higher and you'd need to do some things with the fuses

Ok. bro.. next few days, I am free and get one for a try. Let see how and acknowledge you