What about JG?

[Nec]

Now with JG’s enhanced gearboxes and stock IRLB3034 MOSFETs

Nope it's a 3803. I wish it was the 3034

I Just saw a JG AUG A3 at a game a few weekends ago, the owner let me take off the cover and look at the Chip, It was a IRLB3034. Next time I see one, I'll take a picture.

I know this is a necro post but it's worth posting.

I actually had a chance to look at the JG AUG A3 today, come to find out we were both wrong! The JG AUG A3 uses a IRB1404 with a 20 AMP atuomotive fuse.

[Minerva]

Yea I corrected it later

[Jason Bourne]

Hi guys...

This is regarding my JG....

I have a JG M16 with a generation 4 gearbox, m120 spring and tightbore barrel. It takes large type batteries, up to 9.6v. It is a full stock, so I need that type of wiring.

http://www.airsoftmegastore.com/440_FPS ... -f6619.htm
This is where I bought it/what it is.

My trigger post just broke and I drilled it out and put a cylinder pin in there and secured it with cement putty. I do not think this fix will last.

Also, when I am shooting semi, it is pretty accurate, but when I switch to auto, the bbs have a very wide spread, not nearly as accurate...

I am interested in upgrading my gun. I love the style of the JG I have, so I don't want to buy a new gun, just upgrade the one I have.

I think that I would like to upgrade the internals and the barrel, but I am not sure... any suggestions?

The sooner I get it fixed, the better....

[Minerva]

Get a new barrel/bucking combo.

If you want a new GB, get some 7mm V2 shell and replace it with your broken one.

[Jason Bourne]

Get a new barrel/bucking combo.

If you want a new GB, get some 7mm V2 shell and replace it with your broken one.

What kind of barrel?


Are these what you are talking about? Why would I want a V2?

http://www.foxairsoft.com/Echo1-7mm-Gea ... p/2713.htm

http://airsoft-club.com/shop/internal-u ... r-m4-ver-2

http://airsoft-club.com/shop/internal-u ... r-m4-ver-2

[Minerva]

Yes, and the V2 is the gearbox version that the majority of the M4/M16's run off of.

[Jason Bourne]

Yes, and the V2 is the gearbox version that the majority of the M4/M16's run off of.

How do I measure the size of a gearbox? I have another one which might work..

[Minerva]

What? You don't measure the size, it's the shape.

[Jason Bourne]

What? You don't measure the size, it's the shape.

Oh, okay... I thought it was the size. Sorry. Still earning...

[Unicorn]

Earning?
Did you even read this post? http://airsoftpacific.com/viewtopic.php?t=101
Maybe you should read things and lurk before you start posting.

[MJKramer]

I have the JG G36C and except for A: not using it enough, B: being dumb enough at the time to ok a crawler be put in it and C: being too lazy to clear a malfunction in the high cap that I have, its a great gun.
then again, my knowledge of a gun that I own is inferior to the mad skilz of a COD player who's gonna try to do the reload method that was used in MW3 because thats what we all wanna be right?
if you are headed in the G36 direction and plan to use it in the field, I would suggest the G36K. I am not the only person who says this.

[Switchback]

JG will be my next AEG replica. Cheap, tough as nuts, good for field. Just going to rewire one of their AK spetz's and go from there...

[Jason Bourne]

Now I have a NEW problem... I got the gearbox fixed etc...Now when I got to shoot though, it won't shoot bbs.!!!! How can I fix this?

Thanks.

Jason

[Switchback]

Now I have a NEW problem... I got the gearbox fixed etc...Now when I got to shoot though, it won't shoot bbs.!!!! How can I fix this?

Thanks.

Jason

Check the hop up and the magazines.
Hop up=clear
Magazines=locking into place

[Minerva]

Tappet plate would be a good place to check too, as would the nozzle